However, I found nothing on how to put it all back together. There are a few on how to disassemble and one on how to rebuild. Everything I have found is mainly all about how to remove the jet pump. This impeller wrench is used to install the Solas Twin Prop for Yamaha FZR,FZS,FX. The manual also recommends loctite for the long bolts which connect the duct to the housing.Īny guidance with regard to the driveshaft spindle end and it's connection back to the engine ('power unit') would greatly help. Solas impeller tool WR015 for the YV-TP 12/20 Impeller and YS-TP-14/23. Clearly the little dowels for alignment and gasketmaker at the interface between the impeller housing and the impeller duct.

A repair shop had overcharged me to do it on the other sized last season (and took the whole season to do it!) and I decided to do the 2nd side this year.ĭo I do anything special at the insertion of the drive shaft of the jet pump into the intermediate housing? Other than grease on the spindles of the driveshaft when I removed the unit, I saw nothing else.

I've used this thread and others (and a so-so service manual) to rebuild my 2010 yamaha ar210 jet pump after replacing the impeller housing which was rubbing against the impeller.

Remove seadoo impeller without tool